Metal Studs and Tracks

Studs and Track

Drywall framing: We stock a line of drywall studs in 25 and 20 ga. These studs are available in standard 1-5/8”, 2-1/2”, 3-5/8” and 6” member widths and have 1-1/4” flanges. Corresponding track comes with 1-1/4” and 3” leg. Standard lengths that we stock are 8’ – 24’, custom lengths are available.

Structural framing: We stock a line of structural framing studs in a 18ga. These studs are available in standard 3-5/8” and 6” member widths and have 1-1/4” flanges.

Accessories

Furring channel is available in 7/8”. Bearing surface is 1-1/4”. Furring channel is available in 25 ga. Furring Channel may be used for furring masonry walls and ceiling assemblies or in any other typical wall furring or cross-furring or framing application. Bearing surface is 1-1/4”. Furring channel is available in 25 ga.

Z-furring is available in 25 ga. and 1”, 1-1/2”, and 2” depths. Z-Furring is used to provide support for insulation while allowing for drywall attachment at masonry or concrete walls.

Angle Angle is available in 25 ga. and with a variety of leg lengths, and is 90 degree bend angle. Angle can be used in a variety of applications.

Resilient Channel is offered in 18 & 30 mil thicknesses (25-20 ga.) is used to reduce sound transmission between the gpysum board and the steel framing member. These members are available in standard sizes of 1-1/4" screw flanges.